How To Copy Smart Filters

In this tutorial, y'all'll acquire two means to copy a smart object in Photoshop. Why look at two ways to do the same thing? Well, depending on which way y'all choose, you'll get very different results.

Both ways for copying a smart object are found under the Layer menu in the Menu Bar. The beginning is by choosing the New Layer via Copy command, and the second is by choosing New Smart Object via Copy. One of these commands will create an identical copy of your smart object that shares the same content every bit the original. And the other will create an entirely separate copy that'south completely independent of the original. If you lot don't know the departure between them, you lot tin can get disruptive and unexpected results. So, allow's meet how they work!

I'll be using Photoshop CC but everything is fully compatible with Photoshop CS6. Let's become started!

Setting up the document

To run across the difference between New Layer via Copy and New Smart Object via Copy, we'll start by converting a layer into a smart object. Then, we'll make two copies of the smart object, first using the New Layer via Copy command and so using New Smart Object via Re-create. One time the copies are in place, we'll edit the smart objects and compare the results.

To follow along, you can use any image you like. I'll use this epitome that I downloaded from Adobe Stock.

The paradigm that will be converted to a smart object. Photo credit: Adobe Stock.

If we look in the Layers panel, nosotros see the image on a layer named "Photograph". The Background layer, filled with white, sits below information technology:

The Layers panel showing the prototype above the Groundwork layer.

Adding more sheet space

To make room for the copies, I'll add together some actress canvas space to the document. To practice that, I'll get upward to the Epitome menu in the Card Bar and I'll choose Sheet Size:

Going to Epitome > Canvas Size.

In the Canvas Size dialog box, I'll set the Width to 300 Percent and the Height to 100 Percent. I'll leave the Relative option unchecked. And in the Anchor grid, I'll leave the eye foursquare selected. Then I'll click OK to close the dialog box:

The Canvass Size dialog box.

To fit the new canvas on the screen, I'll go up to the View menu and choose Fit on Screen:

Going to View > Fit on Screen.

And here's the result after adding more canvas. Nosotros now have room to place a copy of the paradigm on either side of information technology:

More sail has been added to the left and right of the image.

Converting the layer to a smart object

To catechumen the epitome into a smart object, I'll make certain I have the "Photo" layer selected in the Layers panel:

Selecting the layer to convert to a smart object.

And then, in the Layer menu in the Menu Bar, I'll choose Smart Objects, so Convert to Smart Object:

Going to Layer > Smart Objects > Convert to Smart Object.

Back in the Layers console, a smart object icon appears in the layer'southward preview thumbnail, telling the states that the layer is at present a smart object:

The smart object icon.

Related: How to create smart objects in Photoshop

Renaming the smart object

Before we go any farther, permit's quickly rename the smart object so we'll know that this is the original. To rename it, I'll double-click on the name "Photo" and I'll modify it to "Original". So I'll printing Enter (Win) / Return (Mac) to accept it:

Renaming the original smart object.

How to re-create a smart object

So now that we've created an initial smart object, let's learn how to brand a copy of it. There are two main ways to copy a smart object in Photoshop. One is by using the New Layer via Copy command, and the other is by using New Smart Object via Re-create. Both are found nether the Layer bill of fare. Let'south beginning with New Layer via Copy.

New Layer via Copy

With your smart object selected in the Layers panel, go up to the Layer menu, choose New, and so choose Layer via Re-create. Note that there'southward also a keyboard shortcut you tin utilize, which is Ctrl+J (Win) / Command+J (Mac). The New Layer via Copy command is unremarkably used for making copies of layers, merely information technology tin can also be used with smart objects:

Going to Layer > New > Layer via Re-create.

In the Layers console, a copy of the smart object is added to a higher place the original:

The Layers console showing the get-go copy.

Moving the copy into place

To motility the copy beside the original smart object in the document, I'll select Photoshop's Move Tool from the Toolbar:

Selecting the Move Tool.

And then, I'll printing and hold my Shift cardinal, and I'll click and elevate the copy over to the left of the original. The Shift key limits the direction you tin move, making it easier to drag straight beyond. Nosotros now accept the original smart object in the center, and the re-create fabricated with the New Layer via Re-create command on the left:

Moving the copy of the smart object to the left of the original.

Renaming the showtime re-create

Over again to help us keep track of things, I'll rename this first copy of the smart object in the Layers panel from "Original re-create" to "Layer via Copy":

Renaming the first copy "Layer via Copy"

New Smart Object via Re-create

Adjacent, let's make another copy of our smart object, this time using the New Smart Object via Copy control. In the Layers panel, I'll click on the original smart object to select it:

Selecting the original smart object.

Then, in the Layer menu in the Menu Bar, I'll choose Smart Objects, and and so New Smart Object via Re-create:

Going to Layer > Smart Objects > New Layer via Copy.

A second copy of the smart object is added above the original:

A second copy appears.

Renaming the 2nd copy

I'll rename the second copy "Smart Object via Copy":

Renaming the second copy.

Changing the guild of the smart objects

And and then, just to keep things organized, I'll click and elevate the "Smart Object via Copy" version above the others:

Changing the order of the smart objects.

I'll release my mouse button to driblet information technology into place. And now nosotros accept the original smart object on the bottom, the New Layer via Re-create version in a higher place information technology, and the copy made with New Smart Object via Copy at the top:

Both copies accept now been added.

Moving the second re-create into place

Finally, dorsum in the certificate, I'll click with the Move Tool on the 2d re-create and I'll elevate it to the right of the original, belongings my Shift key as I drag so it'south easier to move direct beyond. We now take the original smart object in the center, the "Layer via Re-create" smart object on the left and the "Smart Object via Copy" version on the right:

The "Layer via Re-create" (left), "Original" (heart) and "Smart Object via Copy" (correct) smart objects.

Comparing New Layer and New Smart Object via Copy

Now that we have our 2 copies in place, permit'south look at the difference between the New Layer via Copy command and New Smart Object via Re-create. At the moment, both copies of our smart object look the aforementioned as the original. But there's a big deviation betwixt them, and the deviation has to practice with their content.

The copy nosotros made using the New Layer via Re-create command is a true copy of the original because both the original smart object and the re-create share the same content. In other words, nosotros're non really seeing a copy of the image. We're seeing the same image twice. If nosotros edit the content inside the original smart object, the aforementioned change will announced in the re-create. And changing the copy will display the same change in the original.

On the other hand, the copy we made using New Smart Object via Copy is a new smart object that's completely separate from the original, with its own independent copy of the content. Changing the original smart object will have no issue on the copy, and changing the copy will accept no result on the original.

Editing the original smart object

To bear witness you lot what I hateful, let'due south see what happens when we edit the smart objects. I covered how to edit smart objects in detail in the previous tutorial, so here, I'll go through it rapidly. I'll first by making a change to the original smart object. To open it and view its contents, I'll double-click on the "Original" smart object's thumbnail in the Layers panel:

Opening the original smart object.

The contents of the smart object open in a split certificate:

The smart object document.

Adding a Black & White adjustment layer

I'll convert the image in the original smart object to black and white. To do that, in the Layers panel, I'll click on the New Fill or Aligning Layer icon at the bottom:

Clicking the New Fill or Adjustment Layer icon.

Then I'll choose Black & White from the list:

Choosing "Black & White".

A Blackness & White adjustment layer appears in a higher place the image:

The Black & White adjustment layer.

And in the document, we encounter the image now in black and white:

The result after calculation the Blackness & White adjustment layer.

Saving and endmost the certificate

To have the change appear in the main document, nosotros demand to salve and shut the smart object's certificate. To save information technology, become upwardly to the File menu and cull Save:

Going to File > Save.

And then to shut the certificate, go support to the File bill of fare and choose Close:

Going to File > Shut.

Ane change, two results

Back in the main document, we see the issue. The change I made to the original smart object in the eye also appears in the copy on the left (the one made using the New Layer via Copy control). That'southward considering both of them are sharing the same content, so changing i also changes the other. Yet the copy on the right, made with the New Smart Object via Copy command, is unaffected. And that'south because New Smart Object via Copy created an entirely new smart object with its own divide version of the image:

Editing the original smart object affected one re-create but not the other.

Editing the "New Layer via Copy" smart object

To see what we mean past 2 smart objects sharing the aforementioned content, I'll open the "Layer via Re-create" smart object on the left by double-clicking on its thumbnail in the Layers panel:

Opening the "Layer via Copy" smart object.

The contents once again open in a separate document. Merely notice that it's actually the aforementioned certificate that we opened and made changes to earlier, with the same Black & White aligning layer added in the Layers panel. Both the original smart object and the copy are displaying this aforementioned document:

The same content is shared past multiple smart objects.

Deleting the adjustment layer

I'll delete the Black & White aligning layer by dragging it down onto the Trash Bin at the bottom of the Layers panel:

Deleting the adjustment layer from the shared document.

This restores the original color in the image:

Deleting the Black & White adjustment layer restores the colour.

Saving the changes

I'll save the change by going up to the File carte and choosing Save:

Going to File > Salve.

And then I'll close the smart object document by going up to the File carte and choosing Close:

Going to File > Close.

Back in the main document, we again encounter the consequence. Even though this fourth dimension, I made the alter to the copy on the left, the original smart object in the center is also affected. Again, information technology'due south because they're both sharing that same smart object certificate:

Editing the "Layer via copy" smart object also inverse the original.

Editing the "New Smart Object via Copy" version

But let'southward see what happens if we edit the smart object on the correct, the one fabricated using the New Smart Object via Copy command. To open information technology, I'll double-click on its thumbnail in the Layers console:

Opening the re-create made with New Smart Object via Re-create.

Again, the contents open in a carve up certificate. But this fourth dimension, information technology really is a split up certificate. Information technology may look the same equally the ane we made changes to earlier, but because the New Smart Object via Re-create command creates a make new smart object, the contents here are completely separate from the original:

The contents open up in an independent certificate.

Adding a Slope Map adjustment layer

To make a alter, I'll endeavour something unlike by adding a Gradient Map adjustment layer. I'll click the New Make full or Aligning Layer icon at the bottom of the Layers console:

Clicking the New Fill or Adjustment Layer icon.

And so I'll choose Gradient Map from the list:

Choosing "Gradient Map".

A Gradient Map adjustment layer appears above the image:

The Slope Map adjustment layer.

In the Properties panel, I'll click on the small arrow to the right of the gradient swatch, and so I'll choose one of Photoshop'due south built-in gradients, like the Violet to Orange slope, by double-clicking its thumbnail:

Choosing a gradient.

And finally, dorsum in the Layers panel, I'll change the alloy mode of the Gradient Map from Normal to Color:

Changing the aligning layer's blend mode to Colour.

And here's the result, with the gradient colors at present blending in with the image:

The result later calculation the Gradient Map adjustment layer.

Saving the changes

Again, I'll save my changes by going upwardly to the File menu and choosing Salvage:

Going to File > Salve.

And then I'll shut the smart object by going dorsum up to the File menu and choosing Close:

Going to File > Close.

And in the main document, nosotros encounter that this fourth dimension, but the smart object on the right is showing our changes. Again, that'southward because the New Smart Object via Copy command fabricated an entirely new version of the smart object with no connectedness to the original:

Editing the re-create made with New Smart Object via Copy affects only that one smart object.

Replacing the smart object contents

Nosotros've seen the difference between New Layer and New Smart Object via Copy when we edit a smart object. But the aforementioned is true when replacing a smart object's content. If nosotros replace the content of the original smart object, whatsoever copies made using the New Layer via Copy command will also have their content replaced. But copies made with New Smart Object via Copy volition be unaffected.

I'll select the original smart object in the Layers panel:

Selecting the original smart object.

Then, to supersede the prototype inside it with a different image, I'll go upward to the Layer carte, and so I'll cull Smart Objects, and and then Supercede Contents:

Going to Layer > Smart Objects > Replace Contents

I'll navigate to the image I desire to supersede it with, and so I'll click on the epitome to select it, and click Identify:

Selecting the replacement content for the smart object.

Photoshop instantly replaces the image in my original smart object with my new prototype. And because the re-create on the left is sharing the same content as the original, it also had its content replaced. But because the smart object on the right is entirely separate, it's notwithstanding showing its original content:

The new content appears in both the original and the "Layer via Copy" smart objects.

Which way to copy a smart object is best?

At present that nosotros know the divergence betwixt New Layer via Copy and New Smart Object via copy, which one should you employ? If y'all're making copies of a smart object to use in a layout or template, where you lot'll need whatever changes y'all make to the original to appear in the copies equally well, y'all'll desire to use the New Layer via Copy command. And, if you just want to brand a new smart object from an existing i, with no connection between them, employ New Smart Object via Copy instead.

And there we take it! That'south how to copy a smart object in Photoshop! For more on smart objects, larn how to open up and identify images as smart objects, how to edit smart objects, how smart objects let us calibration and resize images without losing quality, and how to apply filters as editable smart filters! You'll also discover many more tutorials in our Photoshop Basics section!

How To Copy Smart Filters,

Source: https://www.photoshopessentials.com/basics/how-to-copy-smart-objects-in-photoshop/

Posted by: royaltymornay.blogspot.com

Share this post